Set All
Jersey No. 10 – Episode 76- Full Episode
|
|
1936 BOONE COMMEM. SILVER HALF DOLLAR SET P,D,S COINS **ALL 3 COINS NGC MS65/66* $799.95 |
|
|
1935 BOONE COMMEMORATIVE HALF DOLLAR SET P,D,S COINS **ALL COINS NGC MS65** $759.95 |
|
|
2009 S SUPERB PROOF LINCOLN CENT SET ALL 4 PENNYS $15.49 |
|
|
1938 BOONE COMMEMORATIVE HALF DOLLAR SET P,D,S COINS **ALL COINS NGC MS64/65** $1,099.95 |
|
|
2007 UNITED STATES MINT SET P & D 28 COINS ALL GORGEOUS GEMS $14.95 |
|
|
1935/1934 BOONE SILVER COMMEM. HALF DOLLAR P,D,S SET **ALL 3 COINS GRADED MS64** $999.95 |
|
|
1987 US Complete Shiney Coin Set w/ All Original Packaging $2.50 |
|
|
Americana Series Presidents Collection Coin Set – All 1964′s – Kennedy, Washingt $16.95 |
|
|
1883-1912-D LIBERTY 5c NICKEL SET 3 COINS MISSING -ALL HAVE PROBLEMS- ID#I950 $125.00 |
|
|
1913-1938 (53 COINS) BUFFALO WHITMAN SET -ALL COINS HAVE PROBLEMS- ID#OO837 $125.00 |
|
|
1913-1938 (53 COINS) BUFFALO NICKEL ALBUM SET -ALL COINS HAVE ISSUES- ID#L658 $0.99 |
|
|
1913-1938 (55 COINS) BUFFALO WHITMAN SET -ALL COINS HAVE PROBLEMS- ID#OO835 $125.00 |
|
|
1913-1938 (56 COINS) BUFFALO WHITMAN SET -ALL COINS HAVE PROBLEMS- ID#OO844 $75.00 |
|
|
1913-1938 (57 COINS) BUFFALO WHITMAN SET -ALL COINS HAVE PROBLEMS- ID#OO836 $125.00 |
|
|
1913-1938 (52 COINS) BUFFALO WHITMAN SET -ALL COINS HAVE PROBLEMS- ID#OO841 $70.00 |
|
|
1913-1938 (58 COINS) BUFFALO WHITMAN SET -ALL COINS HAVE PROBLEMS- ID#OO838 $125.00 |
|
|
YEAR SET 1 9 2 0 ALL 3 MMs..nice grades and ON$$$$$$$$$$$$$$$$$$$ALE $1.99 |
|
|
YEAR SET 1919 ALL 3 MMs..nice grades and ON$$$$$$$$$$$$$$$$$$$$$$$$$$ALE $0.99 |
|
|
1999-2008 COMPLETE SET OF ALL 10 FULL PROOF SETS INC THE STATE QUARTER SERIES $199.00 |
|
|
2006 ALL 3 SETS CLAD & SILVER PROOF + UNCIRCULATED MINT 40 COINS 1.3382oz ASW $79.95 |
|
|
Indian Head Starter Set 1895 thru 1906 All Good Condition $0.99 |
|
|
2009 UNITED STATES MINT SET. 36 COINS IN ALL. PHILADELPHIA & DENVER $22.00 |
|
|
2007 United States Mint Silver Proof Set , Nice Luster On All Coins, SUPER $74.77 |
|
|
2007 United States Mint Silver Proof Set , Nice Luster On All Coins $74.77 |
|
|
1999-2005 United States Mint Proof Sets and Collectors Box. ALL 10 COIN SETS. $30.00 |
|
|
1971 US Mint and Proof Sets Original Packaging ALL THREE MINTS!!! $16.75 |
|
|
1987 Constitution $5 Gold and $1 Silver Proof Set COA and all mint material $49.00 |
|
|
US 24kt Gold Plated All 50 State Uncirc Quarter Set in black Case 1999 2008 $200.00 |
|
|
1937-1947 Walking Liberty Half Dollar Set (All 90% Silver Coins) $525.00 |
|
|
2009-S PCGS Lincoln Set PR70 DCAM (All 4 Coins) $499.00 |
|
|
JEFFERSON NICKEL SET 1938-64 AVERAGE CIRC. ALL KEYS COMPLETE w/ WHITMAN ALBUM $50.00 |
|
|
2007 Presidential Dollar Coins Get all 4 Sets 8 coins Philadelphia Denver $38.79 |
|
|
2010-D AMERICA THE BEAUTIFUL PARKS SET OF ALL 5 COINS $4.29 |
|
|
2010-P AMERICA THE BEAUTIFUL PARKS SET OF ALL 5 COINS $4.29 |
|
|
136 Coin ROOSEVELT Dime Set 1946 – 2010 Collection *ALL 48 SILVER P D S DATES* $114.95 |
|
|
Complete set all 6 2009 Territoties Silver Clad Quarters graded Pf 70 by NGC $69.99 |
|
|
REALLY SHARP 1961 PROOF SET. HALF DOLLAR, QUARTER AND DIME ARE ALL 90% SILVER. $20.52 |
|
|
1994 S MINT SET WITH COA ALL IS LIKE THE DAY IT LEFT MINT PERFECT MUST SEE LOOK* $0.99 |
|
|
Complete set of all 50 First Day Coin Covers Q10 thru Q59 in white envelopes. $425.00 |
|
|
Complete 1979-1999 SBA Dollar Set, 11 Coins All Very High Grade $27.99 |
|
|
Cuisinart ICE-30BC Pure Indulgence 2-Quart Automatic Frozen Yogurt, Sorbet, and Ice Cream Maker $73.95 … |
|
|
Keurig B40 Elite Brewing System $89.99 The Elite Brewing System is Keurig’s gourmet home brewing made affordable. The Elite Brewing System, the most affordably priced Keurig kitchen brewing system, offers K-Cup® coffee, tea and hot cocoa brewing as the elite choice to any drip coffee maker. The Elite offers two cup sizes for brewing options with the programmable feature of Auto Off. The 48-ounce removable water reservoir holds up to 6… |
|
|
Wilton 570-1121 Easy Flex 3-Piece Silicone Spatula Set, Blue $5.91 Silicone Baking Accessories. Silicone is the Wonder Kitchen Tool: it can be used in the oven (up to 500F/260C), toaster over, microwave, refrigerator and freezer and it is virtually unbreakable. These silicone utensils are the perfect tool cold foods: Jell-O, ice sculptures, Candies and hot foods: cake, muffins, bread, pies, main and side dishes and so much more! The flexibility makes removing foo… |
|
|
21 $7.49 ADELE 21… |
|
|
The Ultimate Bee Gees (2 CD) $9.91 All products are BRAND NEW and factory sealed. Fast shipping and 100% Satisfaction Guaranteed…. |
|
|
Trespassing (Deluxe) $10.05 Global superstar Adam Lambert will release his highly anticipated second album TRESPASSING (RCA Records / 19 Entertainment) on March 20th, 2012. Lambert describes TRESPASSING, which he executive produced, as “an exciting journey through the past two years of my life. It’s been a transformative period and I really wanted to make music from what I’ve experienced. All these songs honestly explore the… |
|
|
Star Wars: The Complete Saga (Episodes I-VI) [Blu-ray] $79.53 Relive the unforgettable moments and experience the spectacular adventure of STAR WARS The Complete Saga in a way only Blu-ray can deliver. This incredible collection unites all six Episodes together for the frst time in stunning high definition with the purest digital sound in the galaxy. With over 40 hours of thrilling special features, including all-new content created exclusively for this rele… |
|
|
Star Wars: The Original Trilogy (Episodes IV – VI) [Blu-ray] $31.99 Relive the adventure…discover every detail…experience the epic story of STAR WARS as never before…now on Blu-ray in spectacular high definition with the purest digital sound in the galaxy! The STAR WARS saga concludes with STAR WARS: EPISODE IV – A NEW HOPE, STAR WARS: EPISODE V – THE EMPIRE STRIKES BACK and STAR WARS: EPISODE VI – RETURN OF THE JEDI as Luke Skywalker and Princess Leia, aide… |
|
|
Alien Anthology [Blu-ray] $39.95 Review of AlienA landmark of science fiction and horror, Alien arrived in 1979 between Star Wars and The Empire Strikes Back as a stylishly malevolent alternative to George Lucas’s space fantasy. Partially inspired by 1958′s It! The Terror from Beyond Space, this instant classic set a tone of its own, offering richly detailed sets, ominous atmosphere, relentless suspense, and a flawless ensemble c… |
|
|
Smith’s PP1 Pocket Pal Multifunction Sharpener $7.03 ATTRIBUTES Grit: Coarse/Medium Material: Carbide Ceramic & Diamond Special Features: Tapered Diamond Rod For Sharpening Serrated and Straight Edges Carbide Blades Quickly Set Your Edge Ceramic Stones Give You A Razor Sharp Edge Reversible and Replaceable Carbide Blades and Ceramic Stones Lanyard Hole Type: Hand Held… |
|
|
2010 Olight High Performance Flashlights Gift Set $249.99 2010 Olight High Performance Flashlights Gift SetOlight M20S (CREE S2 LED), TC15 SS (CREE S2 LED), Mini Titanium AAA S2 Model (CREE S2 LED), and Accessories. FAMILY 1th – M20SFeaturesUses the Cree XLamp XP-G S2 Cool WhiteUses 2 x CR123A / 2 x RCR123A / 2 x 16340 / 1x 18650 / 1 x 17670 batteries Dimensions Length140mm (5.5”) Bezel Diameter33.5mm (1.3”) Body Diameter24.80mm (0.98”)Main Specifications of the New Models Max 280 meters/ 306 yards/ 918 feet long throwThree digitally controlled constant brightness levels and strobe. 5 lm (600hrs)-115 lm (12hrs)-340 lm (4hrs); ??????????????????Rugged indestructible aluminum body with anti-scratching type III Hard Anodization Cutting-edge reverse polarity to protect the circuit if put wrong battery.?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? Mil-specMIL-STD-810F Highly Water resistant???????????????????????? Battery Magazine to prevent from 2 x CR123A batteries rattling in the battery tube Operation Turn On/Off The Powerpressing the tail cap switch will turn on/off the power Switch modepressing the side switch when power-on cycles modes through low, medium, high, strobe Direct Strobe Accesspressing the side button when power-off activates strobe mode directlyStandard accessories:2 x O-ringsHolsterLanyardBattery magazine Rubber bootPocket clip Smooth ringFAMILY 2nd – TC15 SSFeatures:LED TypeCree XLamp XP-G S2 MaterialsStainless steel FinishPolish ReflectorOrange peel reflector LensAnti-shattering ultra clear lens Water and Dust Resistant to IP68 SwitchForward Tail Switch???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? Mil-spec MIL-STD-810F FunctionTwo output levels and strobe, High 125 lumens (70 minutes) ->Strobe 10hz (140 minutes)??->-Low 52 lumens (140 minutes) Battery Type1 X AA Alkaline batterySize and WeightL 98.9mm (3.89’’) x D 21.6mm (0.85’’), 102g(3.6oz) (excluding battery) Operation:Press the tail switch to turn on/off the light Gently press the tail switch when light on and release it within 1 second, light will enter into next mode. The cycle return is high, strobe then low Auto-memorize functionthe light will enter into the mode you used last time automatically FAMILY 3rd – Mini Titanium AAA S2 ModelFeatures:LED TypeCree XLamp XP-G S2 Cool WhiteMaterialsTitanium Alloy FinishPolish ReflectorOrange peel reflector LensAnti-shattering ultra clear lens Water and Dust Resistant to IP68 SwitchTwisting head Switch Mil-spec MIL-STD-810F FunctionThree output levels; Low 4 lumens (700 minutes) ->Medium 30 lumens (105 minutes) ->-High 95 lumens (50 minutes) Battery Type1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (Due to the small body size, |
|
|
Falcon X mini indoor 3 Channel Co-Axial RC Helicopter with Gyro $49.99 Smaller Than the Size of Your Palm! Fun to Fly Indoors.Product Description New Falcon X 3.5CH GYRO Electric RTF RC Helicopter comes with a Gyro making this RC Helicopter super easy to fly and maneuver. Ideal for people of all skill levels. Falcon X features a coaxial rotor a single rear rotor for precise movement and a GYRO for increased stability whether flying or hovering. This RC helicopter has a metal body frame making it strong yet light weight. It can go forward, backward, up, down, left, right and hover. What really makes the Metal Falcon X stand out is the built in gyroscope making it automatically stabilize allowing you to focus on flying instead of trying not to make it crash. This product is ready to run, there is no assembly required. Just put in 6 AA batteries into the transmitter/charger and charge the helicopter and you are good to go.Features:LED Strobe to flash for night flightBuilt-in Gyroscope Latest seriesDual propeller system with Super lightweight airframeFull function 3 channel radio controlcharging time35 minutes (from Controller)run time per charge7-10 minutes, control distance10-15 mSuitable for indoor flight onlyIncludes:Metal Falcon-X 3.5CH GYRO Electric RTF RC HelicopterIR Transmitter2 Spare Main Rotor Blades1 Spare Rear RotorInstruction manualSpecifications:Main Rotor Diameter7 InchesLength8 InchesWidth1.5 InchesHeight4 InchesBattery Requirements:Vehicle3.7V 130mAh Li-Poly Rechargeable Battery (Included)Transmitter6 AA Batteries (Not Included).To set up multiple (up to 3) helicopters please follow this setup Turn OFF all helicopters and remotes Set remote #1 to channel “A” and then turn it ON Turn ON the helicopter #1. It will sync itself to the frequency of remote #1 Keep the helicopter #1 ON and turn OFF the remote #1 Set remote #2 to Channel “B” and then turn it ON Turn ON the helicopter #2. It will sync itself to the frequency of remote #2 Keep the helicopter #2 ON and turn OFF the remote #2 Set remote #3 to Channel “C” and then turn it ON Turn ON the helicopter #3. It will sync itself to the frequency of remote #3 All three helicopters are set to three different channels, TurnON the three remotes (each one set to different channel) and enjoy thefly! |
|
|
2-6 Cell Lipo Pack Balancer $46.99 Untitled Document Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 22.2 volts (6S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it’s balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the “Accessories” category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Lithium pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LED’s will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps and wait until the LED’s begin to blink again. This indicates that at least one cell has reached 3.7 volts or more. Disconnect balancer and then reconnect for another Low Voltage Test. Repeat as needed until all LED’s turn on for 5 seconds indicating that all cells have at least 3.2 volts. Then you can proceed to charge normally. Balancing While Charging Connect the balancer and wait for the low voltage check.If all cells show 3.2 volts you can proceed with a normal charge sequence. The LED lamps will remain off until one cell reaches a voltage of 3.7 volts. Then balancing will begin. By the time the charge is complete the pack should be balanced. If the cells blink at random the pack is closely balanced. If a few LED’s remain on all the time these cells have a higher voltage then the other cells and more balancing is needed. When the charge is almost complete all the LED’s will turn on. Balancing After Charging Connect the Balancer to the pack. The balancer will begin discharging every cell that has more than 4.15 volts. When all cells are 4.15 volts or less then the balancer will begin balancing to the lowest cell. When all Led’s turn off or occasionally blink at random, then the pack is balanced |
|
|
Universal Smart TLP-2000 Charger for Li-Ion/Polymer battery Pack (3.7V – 14.8V 1-4 cells) with Lipo Pack Balancer $99.99 Smart universal charger for Li-Ion and polymer Li-ion battery packwith capacity > 500mAh 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V Charges pack made of 1 to 4 cellsUniversal 100V – 240V AC input for worldwide powerusage 500 mA constant charging current.Automatic charging stop when battery packis fully charged ,or when each cell ‘s voltage reaches 4.2V peakLED indicationRedmeans ” In Charging ” and Greenmeans ” Full ” or “open circuits “With Tamiya Conncetor Weight4.5 ozDimension1.5″ x 1″ x 4″Operation Select right voltage level for your pack. For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the chargerFor 7.2/7.4V 2-cell pack, set switch button 8.4 position on the chargerFor 10.8/11.1V 3-cell pack, set switch button 12.6 position on the chargerFor 14.4/14.8V 4-cell pack, set switch button 16.8 position on the chargerWarningUse special caution when working with Li-ion / Li-polymer cells and packs, they are very sensitive to charging characteristics and may explode if mishandled. Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proofenvironment in chargingNever leave batteries unattended when chargingDo not put batteries on wood surface or carpet when chargingWe are not responsible for any damage caused by misusing or mishandling of Li-Ion / Li-Polymer batteries in charging We are not responsible for damage caused by other Li-ion batteries not supplied from us Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product if any changes are made to the charger, accessories or connectors. Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 14.8 volts (4S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it’s balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the “Accessories” category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Li-ion/Li-Polymer pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LEDs will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps a |
|
|
20pcs Tenergy AA 2000mAh NiMH Rechargeable Batteries w/ Tabs $79.99 Key Features High quality Ultra High Capacity AA Size rechargeable Nickel Metal Hydride (NiMH) battery With tabs for easy solderingExact replacement for standard AA size battery in all the devicesProvides ultra long use time per charge with this ultra high 2000 mAh capacityAdvanced NiMH technology means twice as long use life per charge than the ordinary rechargeablesDesigned for enhanced performance for high drain applications such as digital cameras, CD players, portable audio devices, hand held games, 2way radios, PDAs, and other portable high drain digital electronicsCan be recharged for up to 1000 times, providing big saving by replacing hundreds of throw away AA batteries.Convenient operation without memory effect. Can be charged anytime.Can be rapidly charged with any quick charger, smart chargers, plug in charger or universal chargersOneFree Battery holder included for each set of 4 AA batteriesWeight per cell 0.06 lbs6months warrantyBattery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time |
|
|
Voltage Regulator Breakout Board $19.99 Untitled DocumentProduct Description If you do not feel comfortable soldering, our voltage regulator breakout board can help.It extends the regulator’s connection pins to a set of screw terminals that are easier to manipulate.To use the board, plug in the voltage regulator you want with the correct orientation. Then you can connect your power source and load by stripping wires and clamping them into the screw terminals.Now you can powerwireless cameras, lighting systems and much more with minimum hassle.This breakout board can house our fixed regulators, adjustable regulators, AnyVolt Mini, and standard 78xx style linear regulators.The breakout board does not ship with any voltage regulators included. Weight6g / 0.2oz |
|
|
Protection Circuit Module For 3 Cells LiFePO4 Battery Pack $37.56 Untitled DocumentSpecifications of 3 Series LiFePO4 Batteries Charge & Discharge Guard ShieldApplication:The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions:The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point. Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point. Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.Function of short circuit protectiononce battery groups output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit. Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery groups capacitance. Function of low-current lockseries connection of low-current lock gets reserved and low current controls on-and-off of the main high current to make it safer and more convenient.Specified TypesYS80725.Technical Index Item 3series balancing guard shieldOvercharge protection (V)3.95??0.025 Overcharge recovery (V)3.80??0.05 Overdischarge voltage (V)2.2??0.1 Overdischarge recovery (V)Cutload or chargeNormalworking current (A)15Overcurrent protection (A)30Internalresistance ??(??m/ohm)<30Chargingbalancing current (mA)60Chargingbalancing voltage (V)3.63??0.03 Overcharge postpone time (mS)1.2Overdischarge postpone time (mS)144Shortcircuit protectionyesLow-currentlockyesConnection reservedTemperaturecharacteristic??1.0mv/ Workingtemperature????????( )-10~+60Storagetemperature??????????( )-30~+85Powerloss (uA)<180normal Vn=3.2v<20Under-voltage Vn2.2v????loadedDimension (mm)59 x 44 x 8Weight(gram)23 Download Installation guide here.Usage and Attention After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused. When lines get connected, bits of copper and tin should not cling to the guard shield. Protection board should be connected to battery group with compliance to specifications and any leading line s |
|
|
Protection Circuit Module for 4 Cells LiFePO4 Battery Pack (20A/33A) $42.6 Specifications of 4 Series LiFePO4 Batteries Charge & Discharge Guard Shield Application The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Main Functions The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock.Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point.Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point.Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.Function of short circuit protectiononce battery group’s output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit.Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery group’s capacitance.Specified Types4S LFP PCM Technical Index ItemSpecificationBattery TypeLiFePO4 BatteryBattery Cell4 CellsInput Charging Voltage14.6??0.3VInput Charging Current20AContinuous Discharge Current20AOver Charge Detection Voltage (Cell)3.900??0.025VOver Charge Release Voltage (Cell)3.800??0.050VOver Discharge Detection Voltage (Cell)2.000??0.050VOver Discharge Release Voltage (Cell)2.300??0.100VOver Discharge Detection Current33??5ABalance Open Voltage (Cell)3.600??0.025VBalance Release Voltage (Cell)3.600??0.050VBalance Current (Cell)65??5mAShort Circuit ProtectionHaveDetection Delay Time300-5000uSRecovery ConditionDisconnect LoadMain Loop Electrify Resistance 20m Current Consume in Normal Operation 50??A Dimension (mm)75 x 50 x 1.6Weight(gram)27 Download product data sheet here.Usage and Attention:After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused.When lines get connected, bits of copper and tin should not cling to the guard shield.Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side.When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent th |
|
|
Protection Circuit Module for 15 Cells LiFePO4 Battery Pack (Working: 10A) $87.49 Specifications of 4 Series LiFePO4 Batteries Charge & Discharge Guard Shield Application The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.Features Provide protection function and balance function to 15 cells High Power LiFePO4 Battery in series. Over voltage, under voltage, over current, short circuit. Bleeding for cell balance. Low power consumption. Functions:The product has 6 main functionsover charge, over discharge, over current, short circuits, balancing and low-current lock. Function of over charge protectiononce voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point.Function of over dischargeonce voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point.Function of over currentduring the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.Function of short circuit protectiononce battery group’s output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit.Function of voltage balancingin the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery group’s capacitance.Function of low-current lockseries connection of low-current lock gets reserved and low current controls on-and-off of the main high current to make it safer and more convenient. Specification Overcharge Detection Voltage3.90V (3.87V-3.93V)Overcharge Release Voltage3.80V (3.77V-3.83V)Balance Activation Voltagecells voltage greater than 3.6VBalance Release Voltagecells voltage less than 3.6VBalance Current75mAOverdischarge Detection Voltage2.00V (1.95V-2.05V)Overdischarge Release Voltage2.30V (2.25V – 2.35V)Overcurrent Detection Current25A (20A-30A)Max. Continuous Discharge Current14ACurrent Consumption in Normal Operation (B-)less than 10uACurrent Consumption in Overdischarge and Load not Removed (B-)less than 200uACurrent Consumption in overdischarge and load removed (B-) less than 10uAOperatingTemperature Range-20~+60CHumidity0~90% Rh (No waterdrop)StorageTemperature Range+10~+30CHumidity0~90% Rh (No waterdrop) Download product data sheet here.Usage and Attention:After purchasing the protection mold, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be cau |
|
|
Combo: Tenergy TB6B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply $99.99 The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Also Included ($10.99 value added FREE!)Supports the following connector types TraxxasTamiyaMini Tamiya (for Airsoft packs) JSTHitec EC3 DeansSupports MULTIPLE types of battery packs with one single charger! The follow packs are supported NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA) What does it mean for an RC Car/Helicopter or Airsoft Hobbyist? Charge yourNiMH/NiCD Receiver Packs3.6v, 4.8v, 6v, or 9.6vCharge your LiFE Packs3.2v – 19.2vCharge your normal NiMH/NICD Packs7.2v, 8.4v, 9.6v, 10.8v, 12vCharge your High Performance LIPO Packs7.4v, 11.1v, 14.8v, 18.5vCharge your Airsoft NiMH/NICD Packs8.4v, 9.6v, 12vCharge your Airsoft LIPO/LiFe Packs *NotePack voltages above are samples of the more popular hobby packs. See bottom chart for full Chemistry and Voltage support. One single TB6b supports all these battery packs. PLUS! It will balance your expensive LiFe & LIPO packs to ensure longer cycle and battery life.Future proof yourself for any new battery pack or upgrades, instead of having contantly buy 1 charger for each type of pack.What does it mean for a custom pack builder? Endless fun and charging capabilities – you have an All-in-One charger for any kind of pack idea you have! Charger Specifications Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries. Easy to Read LCDBuilt-in Balancer DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz (AC Adapter) Charge/discharge powermax. 50/5 WattsNiCd/MH 1~15 cellsLiIo/LiPo/LiFe 1~6 series Pb2~20VCharge current0.1 to 5.0ADischarg current0.1 to 1.0ANo. of cycle1 to 5 times Battery data memory up to 5 data Weight246gDimension130x85x33 mmUser’s setting-up parametersBattery voltage typeLiIo:3.6V, LiPo:3.7V, LiFe:3.2VNiCd Delta-peak voltage sensitivity1 to 20mVNiMH Delta-peak voltage sensitivity1 to 20mVBattery temperature cut-off20 to 80C or OFFWaiting time between charge/discharge1 to 60 min. Integral timer limit for safety10 to 720 min.or OFFMaximum charging capacity limit for safety10 to 9990mAh or OFFKey beep and buzzer soundON/OFFInput DC power low alert10 to 11VOptimized operating softwareWhen charging or discharging, TB6B has an ‘AUTO’ function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Individual voltage balancer for Li-ion/Li-Polymer batteries inside TB6B has |
